|
| |
| Massey Harris & Massey Ferguson Tractors Discussion Forum |
Topic: Re: mf65 oil smoke
[Show Entire Topic] [Return to Forum]
| Author |
[Modern View]
|
| Masseynut(Australia)
01-29-2013 11:42:11
121.223.35.221
|
I have to agree, that's not guide or stem smoke.
Have the sleeves been replaced? Did you check the ring gaps? Should have been around .004" for every inch of bore diameter.
One other possibility is that the clearance on the conrod bearings is excessive. This creates excess oil flow from the journals, that the oil rings cannot cope with. Had a Perkins 3 cylinder this problem not that long ago. Did you measure the crank if it went back in worn, or was it ground?
Were the oil control rings fitted correctly?
Let us know,
Evan.
|
|
|
|
| DavidP, South Wales
01-29-2013 12:17:45
2.101.115.152
|
|
Re: mf65 oil smoke in reply to Masseynut(Australia), 01-29-2013 11:42:11
|
|
| I had the same thoughts as Evan about ring gaps and whether the oil control, or all rings were correct or fitted incorrectly. What did you do in the way of repairs/replacements? With the degree of smoke that you describe it seems that the oil rings are pushing the oil upwards and not down.
DavidP, South Wales
|
|
| [Show Entire Topic]
[Options]
[Printer Friendly]
[Return to Forum]
[Add a Reply]
| Same-Day Shipping! Most of our stocked parts ship the same day you order (M-F). Expedited shipping available, just call! Most prices for parts and manuals are below our competitors. Compare our super low shipping rates! We have the parts you need to repair your tractor. We are a Company you can trust and have generous return policies! Shop Online Today or call our friendly sales staff toll free (800) 853-2651. [ More Info ] |
Home
| Forums
Copyright © 1997-2013 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor Headquarters |
About this site - Yesterday's Tractors is your one-stop source for antique tractors. If you are interested in older tractors you've come to the right place! Join more than 275,000 other classic tractor enthusiasts from all over the globe. We have many resources for antique tractor enthusiasts available including photos, classified ads, more than 24 tractor discussion forums, a show guide, values, specs and much more. Bookmark this site and come back often. Thanks for stopping by! Feel free to use our feedback form to send us your comments, suggestions and ideas.
|
|
|
