Author	[Modern View]
East_TN_Jeff 01-22-2013 16:45:28 71.226.190.106 Report to Moderator	I have a MF-50 with the Z134 gas engine and am in need of a carb kit. I have looked at numerous websites for the proper kit and am confused. I have a Carter carb that is stamped "UT O 1145" on the body. There is a brass tag on the carb that has, as best as I can tell, "2612S" or possibly "25125" stamped on it. Any idea which carb kit is the correct one, and where I can get it? Thanks [Reply]   [No Email]
matt p 01-23-2013 10:34:47 69.31.197.148 Report to Moderator	Re: Massey Carb kit in reply to East_TN_Jeff, 01-22-2013 16:45:28   The carb doctor is the home site for Carbkitsource.com . They have a great selection and a easy to use website,ordered mine their too. I have the mavel-schubler #683 on the z134 and it uses kit #CK672 This post was edited by matt p at 10:40:50 01/23/13.   [Reply]  [No Email]
East_TN_Jeff 01-23-2013 10:04:43 71.226.190.106 Report to Moderator	Re: Massey Carb kit in reply to East_TN_Jeff, 01-22-2013 16:45:28   Thanks everyone for the help. I ordered one from The Carburetor Doctor, along with the manual. The kit from Tractor Supply doesnt appear to be the one for my carb, and the gaskets are different (based on what I see on their website. My local TSC didnt have any in stock for Carter carbs.   [Reply]  [No Email]
Jason S. 01-23-2013 10:38:34 204.54.36.245 Report to Moderator	Re: Massey Carb kit in reply to East_TN_Jeff, 01-23-2013 10:04:43   Your kit may be different than the one I got, but the idle needle that came with my kit was nothing like the original one in the carb.So hang on to it just in case.   [Reply]  [No Email]
Jason S. 01-23-2013 08:36:23 204.54.36.245 Report to Moderator	Re: Massey Carb kit in reply to East_TN_Jeff, 01-22-2013 16:45:28   I got a kit for my Carter UT at TSC,but if your float is bad,Toss the carburetor.The floats arent available from anyone that I know of.Tisco's part number for the kit is BK201V. http://www.tractorpartmart.com/us/index.html?target=products&product_id=11409   [Reply]  [No Email]
Inno 01-23-2013 08:06:42 65.95.122.231 Report to Moderator	Re: Massey Carb kit in reply to East_TN_Jeff, 01-22-2013 16:45:28   Tractor Supply Co.   [Reply]  [No Email]
Tony in Mass. 01-23-2013 07:10:16 76.127.225.182 Report to Moderator	Re: Massey Carb kit in reply to East_TN_Jeff, 01-22-2013 16:45:28   R U near a TSC? I believe there is enough extra stuff in each bubble pack kit to rebuild any of the carbs used on the list printed there. Without stinking up the store, bring the carb with ya. What are they? $25-27?   [Reply]  [No Email]
matt p 01-23-2013 07:32:09 69.31.197.148 Report to Moderator	Re: Massey Carb kit in reply to Tony in Mass., 01-23-2013 07:10:16   Hey Tony what is TSC ? being a Canadien living in the sticks!   [Reply]  [No Email]
2tractors 01-24-2013 04:48:16 207.144.5.133 Report to Moderator	Re: Massey Carb kit in reply to matt p, 01-23-2013 07:32:09   TSC= tractor supply company. Can be found online.   [Reply]  [No Email]
hymie2lt 01-22-2013 18:16:55 100.43.123.38 Report to Moderator	Re: Massey Carb kit in reply to East_TN_Jeff, 01-22-2013 16:45:28   Hi Jeff Agco parts books shows the carb kit for a Carter Carburetor UT-2612S, as Part number 835538m91. This should be the right one according to your numbers. However I cannot find a carb kit with that number anywhere. It is NLA at Agco too. Wayne   [Reply]  [No Email]
matt p 01-23-2013 04:03:53 69.31.197.148 Report to Moderator	Re: Massey Carb kit in reply to hymie2lt, 01-22-2013 18:16:55   you could try carbkitsource.com   [Reply]  [No Email]
matt p 01-23-2013 04:21:28 69.31.197.148 Report to Moderator	Re: Massey Carb kit in reply to matt p, 01-23-2013 04:03:53   yes they have a kit #CK 650. 2612s should be your number on your brass tag   [Reply]  [No Email]