Author	[Modern View]
Deere Driver 01-14-2013 22:29:26 50.90.47.129 Report to Moderator	The serial number plate on my Massey-Harris MH50 is readable, but two of the four corners are broken off. Now, only two screws hold the plate. Is there a replacement plate available that I could transfer my serial number to or would the tractor be more valuable with the original, damaged plate? [Reply]   [No Email]
Deere Driver 01-16-2013 05:15:08 50.90.47.129 Report to Moderator	Re: Serial Number Plate in reply to Deere Driver, 01-14-2013 22:29:26   Thanks for all of your replies. I will probably check out Wayne Saak's guy, but I am betting I will end up staying with my original tag to maintain the original character of the tractor. [Reply]  [No Email]
miner09 01-15-2013 15:11:21 75.224.253.150 Report to Moderator	Re: Serial Number Plate in reply to Deere Driver, 01-14-2013 22:29:26   Steiner only has engine serial number tags.Not serial number on dash. What are you looking for? Never seen a company offer one for dash. [Reply]  [No Email]
Wayne Saak 01-15-2013 13:53:58 69.66.191.93 Report to Moderator	Re: Serial Number Plate in reply to Deere Driver, 01-14-2013 22:29:26   Dan Whalen makes very nice serial tags for M-H with your number stamped on them. Address: 2165 Berry Rd. Amelia, OH. 45102-9720 [Reply]  [No Email]
Deere Driver 01-16-2013 05:06:40 50.90.47.129 Report to Moderator	Re: Serial Number Plate in reply to Wayne Saak, 01-15-2013 13:53:58   Thanks for the tip. I may try to contact this guy if I decide to replace my old, damaged plate. [Reply]  [No Email]
Harold Oelke 01-15-2013 10:08:40 208.69.244.209 Report to Moderator	Re: Serial Number Plate in reply to Deere Driver, 01-14-2013 22:29:26   Deere Driver, You can get serial number blanks with rivets from the Steiner Tractor cataloug Ph 1-800-234-3280, or www.link_disallowed hope this can help you. --------Harold [Reply]  [No Email]
miner09 01-15-2013 05:28:49 75.222.99.42 Report to Moderator	Re: Serial Number Plate in reply to Deere Driver, 01-14-2013 22:29:26   I don't know of any new ones. It's better to use the original plate. [Reply]  [No Email]
Deere Driver 01-16-2013 05:10:10 50.90.47.129 Report to Moderator	Re: Serial Number Plate in reply to miner09, 01-15-2013 05:28:49   Wayne Saak posted a message (above) about a guy who makes new tags. I kind of agree with you, though, that I would probably be better to stick with my original plate. It is damaged, but very readable. Thanks for your reply. [Reply]  [No Email]
VTParts 01-15-2013 17:50:59 72.71.201.20 Report to Moderator	Re: Serial Number Plate in reply to miner09, 01-15-2013 05:28:49   I have a very nice MF 50 Serial Number plate complete with rivets for Sale on E Bay. Holes are complete and not elongated, tag was carefully removed. Available for immediate delivery. [Reply]  [No Email]
Deere Driver 01-16-2013 05:13:04 50.90.47.129 Report to Moderator	Re: Serial Number Plate in reply to VTParts, 01-15-2013 17:50:59   I'll check it out, but what I need is a MHF plate...not an MF plate. [Reply]  [No Email]
VTParts 01-16-2013 16:06:15 72.71.201.20 Report to Moderator	Re: Serial Number Plate in reply to Deere Driver, 01-16-2013 05:13:04   Your opening post stated MF 50, sorry for the miscommunication. Dave [Reply]  [No Email]