tool ID help working on 34 loader

EJ70

Member
Got the lift cover back on the 31 this morning after cleaning the filter and putting new o rings in the stand pipe. Next up is new seals and o rings in the loader control valve. Looking at the valve it appears like I am going to need a spanner type wrench or socket to get at the seals. Just under the control levers the cap nuts are slotted. Is this a special MF tool or a something I can get elsewhere.
Thanks
Eric
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top