Pony rear tire valves leaking

Pony1952

Member
Does anyone have a recommendation as to what make/model/type of valve stem to use to replace mine that are leaking? There is fluid in the tires. Also, where do I get them?
Y'all will be pleased to hear I got that clutch working and without removing engine. Just slid engine forward 3 inches and adjusted clutch release levers. Photos also included in most recent post to ThatIdioticTractor.com.
Untitled URL Link
 
You will probably need to ask your local tire guy. Everyone here is probably clueless to what you have.

That is one nice feature with having a jackshaft between engine and tranny. It was fun pulling the engine out of my 101 Senior.
 
Napa has them but there are 2 different types. Be sure to jack up the wheel and roll the valve stem up on top before removing the core.
 
Try looking in gemplers tire section. Might give you a picture, and a type number, to compare yours to. There are a wide variety, as others have said, some have a removable core section, others jist the valve core is removable. Either way, calcium eats them up!
 
There are two styles of stems, inside thread and outside thread. Take a cell phone pic of both stems on your tractor, and stop at a good tire shop, one that does trucks and equipment. You will want the big stem(they are two piece)the tire shop will sell you what you need.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top