Topic: Re: MF 175 hydraulic problems
|Massey Harris & Massey Ferguson Tractors Discussion Forum|
[Show Entire Topic] [Return to Forum]
[Show Entire Topic]
[Return to Forum]
[Add a Reply]
Top lid has to come off, to get at the back of those bulkhead fittings and to change the filter unless the tractor has a plate with 3 bolts under the transmission housing. Before removing the lid remember to remove the little roller from between the forks on the control linkage at the response/dipstick side. We only ever use 15W30 or 40 Super Universal Oil in these tractors. I am assuming your pump is shot as it is too small a pump for heavy loader work, these tractors should be plumbed for combining the two pumps for loader work, but both pipes from the pumps need non-return valves ftted. If you want to get a few more years out of the tractor and everything else is working OK, then you could plumb your main pump up to the spool valves through a diverter valve on the top cover, but it means locking the 3 point and putting the pump into Constant Pumping. Email me if you like....
|Same-Day Shipping! Most of our stocked parts ship the same day you order (M-F). Expedited shipping available, just call! Most prices for parts and manuals are below our competitors. Compare our super low shipping rates! We have the parts you need to repair your tractor. We are a Company you can trust and have generous return policies! Shop Online Today or call our friendly sales staff toll free (800) 853-2651. [ More Info ]|
| Copyright © 1997-2013 Yesterday's Tractor Co.|
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
Yesterday's Tractors - Antique Tractor Headquarters
|About this site - Yesterday's Tractors is your one-stop source for antique tractors. If you are interested in older tractors you've come to the right place! Join more than 275,000 other classic tractor enthusiasts from all over the globe. We have many resources for antique tractor enthusiasts available including photos, classified ads, more than 24 tractor discussion forums, a show guide, values, specs and much more. Bookmark this site and come back often. Thanks for stopping by! Feel free to use our feedback form to send us your comments, suggestions and ideas.|