Pony Clutch

Pony1952

Member
Well, poop! Got Pony all put back together. Engine running pretty good, so today tried the clutch. Must have done something wrong during reassembly, because it's not working at all. My question, can I get intructions and diagram(s) anywhere for repairing the clutch. btw, I did put in new clutch plate and new throw-out bearing. Must have missed something pretty basic, but just don't know.
Thanks,
Bruce Boehmke
ThatIdioticTractor.com
 
Yes, pedal works ( with new spring) and moves throw rod which in turn moves the lever (not sure what it's called) that supposedly engages clutch inside the torque tube. But I feel nothing happening when that lever moves. Sure wish I had an internal diagram showing how the parts all fit together inside the torque tube.
Bruce Boehmke
 
Bruce, spring on throw out bearing lever engages the pressure plate fingers to work the clutch plate. Did you line up clutch in center of pilot bushing. If it is a new pressure plate sometimes they block fingers until it is installed and you remove spacers before putting motor back in. Let me know how you are doing, not really anything in manual for diagrams to go by. I have had mine apart acouple of times, no problems. I do have parts incase you need something. Good luck
 
Well, probably not I'm guessing, but a lot of time has gone by since it was installed, and even then, I didn't have a lot to go on.
What is best way to get engine out of the way enough to go in and check out the installation?
Bruce
Thatidiotictractor.com
 
Happy to have pics sent to [email protected], but I have the operators manual and the service manual. None of them show a view back into the torque tube that shows proper arrangement of forks and throw out bearing and its sleeve and spring. Have I missed something? Thanks.
Bruce
Thatidiotictractor.com
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top