Author	[Modern View]
Longmeadow farm 10-06-2012 10:44:54 67.248.204.57 Report to Moderator	My brother-in-law wants to mount a recently purchased model 101-A Davis loader, formerly mounted on a Ford NAA ... on a gas powered Massey Ferguson 135. He is missing the front mounting hardware/bracket that goes under the front of the 135 engine and probably mounts to the side of the engine block. Any ideas of where I may be able to find the part or at least an appropriate parts manual ..probably could make one... thanks [Reply]   [No Email]
Inno 10-06-2012 15:43:29 65.95.123.154 Report to Moderator	Re: Davis Loaderhelp in reply to Longmeadow farm, 10-06-2012 10:44:54   I just took a 99 Davis loader off my TO-35 although the mount was pretty rusted out in some spots. It bolted on underneath the front end.........not sure if would be even similar on a 135 but I could take some pictures of the mount if you think it might help. [Reply]  [No Email]
longmeadow farm 10-07-2012 04:55:42 67.248.204.57 Report to Moderator	Re: Davis Loaderhelp in reply to Inno, 10-06-2012 15:43:29   Thanks for the offer, I'm sure it would be a great help to obtain a picture...you can e-mail the picture when you get a chance. I suspect the mount, while not identical, would be somewhat similar and give us at least a starting point. I have posted requests and "shopped" around.. but no luck so far. Where are you located...?? perhaps you ship us the rusted part... we'll pay of course. We are located in the Albany area of New York State. [Reply]  [No Email]