(800) 853-2651
SHOP NOW

Loader Hydraulics for 255 Massey

K

Keith Molden

Well-known Member
Thinking about mounting a loader on my 255 Massey. It does have the remote on it with the independant control lever on the right side between the seat and the 3 pt. control. Question is, how would I plumb the hydraulics for the loader so I would have both raise and lower and controlled bucket (I'd want to use dual controls mounted seperate from the control all ready on the tractor) and really would not want to connect them to the remote quick disconnects. Any body got any ideas? Keith
 
Does tractor have 1 or 2 hyd spool aux valves? If 2, 1 would still be free for other use and loader valve plumbed into couplers and lever tied back to constantly feed loader valve. Otherwise a front mount crank driven pump would be best for loader use.
 
You could direct couple them and leave the quick connects off but then you wouldn't have quick connects for other implements.
 
it only has 1 spool. Guess I'd probably be better off with a front mounted pump and running the loader seperate from the rest of the system. What do ya think? Keith
 
You must log in or register to reply here.

Similar threads

J
MF 255 3 point raises by auxiliary control
Replies
4
Views
131
Jgreen0890
J
R
John Deere 5410 with 541 Loader Hydraulics
Replies
0
Views
75
Ron Stazick
R
S
Massey 150 3 pt problem
Replies
2
Views
216
Spencer2598
S
K
Massey 31 Industrial Hydraulic/3 Point Questions
2
Replies
22
Views
4K
Kmfl
K
M
Ford 3600 diesel with Loader
Replies
0
Views
141
ManaFarmandForge
M
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top