M.J. In OK
New User
I've got a 66 Massey Ferguson 1100 that I need to split at
transmission & engine block. There are no bolt holes on the
side at the back of the motor, considering using a heavy
enough dolly and 8x8 cedar blocks stacked up to the bottom of
the pan, I was curious if anyone could tell me if the pan can
handle the weight it looks pretty thick but just not sure.
Thanks
Michael
transmission & engine block. There are no bolt holes on the
side at the back of the motor, considering using a heavy
enough dolly and 8x8 cedar blocks stacked up to the bottom of
the pan, I was curious if anyone could tell me if the pan can
handle the weight it looks pretty thick but just not sure.
Thanks
Michael