MH 44 spin on oil filter

David G

Well-known Member
Can you tell me which of the lines going to the filter is the supply and which one is the return? I am adding a spin on oil filter.
 
The metal one towards the front of the engine is the supply, rubber one that comes out the bottom of the canister and dumps into the block towards the rear is the return. NAPA sells a spin on mount specifically for a by pass filter with 1/8 pipe fittings that will fit real nice, you can use the same supply and return lines, supply has to be re-bent some to fit, use a 1051 NAPA filter on it.
 
Mike, I am thinking about leaving those lines plugged for startup so I can see any oil pressure issues without worrying about the new filter configuration.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top