(800) 853-2651
SHOP NOW

USA vs UK models of MF-35

A

Anonymous-0

Well-known Member
On occasion I have seen various comments about differences between the MF-35 model built in Detroit and the same model manufactured in Coventry England. Is there a list of the significant differences in the model based on where it was produced? Today I was doing brakes on a UK tractor and had ordered 830480M92. These are available from a number of sources, but only one states for US tractors only. Well they were right -the spring holes and shoe hold down pin holes were in wrong spot, plus the slot for the adjuster was 1/2" too long. I had to drill my own holes and grind down adjuster slot to make the shoes work. I would have liked to skip the extra fab work.
 
Yours is either the diesel or standard gas and both are hard to order for. Got one too and you need to read the fine print or else turn up with an oil filter and speedo cable for a deisel.
 
It is a diesel deluxe with the Perkins 3 cylinder diesel. The AGCO parts books don't seem to note any difference between US manufacture vs UK manufacture. It is a problem. I have ordered some parts from England put then they have to clear customs and pay some duty.
 
Hi Andy,
One difference that you have found in the shoes is the method of retaining them to the back plate. Whilst the same size UK TE20's had a bolt top and bottom with a large washer which allowed the shoe to move in a slot. UK 35's had the thin pin and spring arrangement.
Your 830480M92 does not appear to be a good number in the UK.
DavidP, South Wales
 
You must log in or register to reply here.

Similar threads

S
Schebler carb differences between TE/TO 20 vs 35
Replies
3
Views
1K
Sum~Guy
S
R
mf 35 braking
Replies
6
Views
878
ronztractor
R
S
MF 42
Replies
1
Views
470
sqr2000
S
C
MF 35 lift arms hydraylic issue
Replies
2
Views
1K
Cormiers Cove
C
D
MF 135 Prototype?
Replies
7
Views
3K
DavidP, South Wales
D
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top