toy tractors with the cox engine

looking too buy vintage toy tractors 1/16 scale with the cox engine all makes running or not email call or text 507-383-8189
<image src="http://forums.yesterdaystractors.com/photos/mvphoto7645.jpg"/>

<image src="http://forums.yesterdaystractors.com/photos/mvphoto7646.jpg"/>
 
I have 4 that I pulled but not for sale at this time. I have the sled and spare tires,engines, gears, engine parts.
a250591.jpg

a250592.jpg

a250593.jpg

a250594.jpg

a250595.jpg

a250596.jpg

a250597.jpg
 
The fifth photo down is what one looked like when I bought it from allis dealer. The drive system was made by an outfit out of Ohio and you could change gears to get different gear ratios. We took and froze rear tires and put them in lathe and turned them down and put screws in from back side to pin them so they would spin on plastic centers. The wide tires on the tractor with cab was what they called a super stock and was foam rubber. The MF 1155 I had to cut model down and put drive unit in it. I built the weight brackets and narrow front end under the 7060 Allis Chalmers. Three of them have recoil starters and the 7060 uses a electric motor to start it.
 
The place that we got ours through in the 70's was called Mid-East Distributors out of Mansfield,Ohio but are no longer in business. The tractor like one in photo ( basic unit) was $125.00 with Cox .049 engine or a $131.95 with a Cox.049 with TD cylinder. There are places still making these but you will have to hunt for their websites.
a251380.jpg
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top