how to clean my 1/16 models

Brad in WI · Dec 27, 2008

I leave my models out to be displayed and what is the best way to remove the dust from them. also I have a few that have very dusty tires. How can I remove that from the lugs and rest of the tires. Thanks
Brad

rhettcale · Dec 27, 2008

you could use co2 to blow the dust off, available at computer stores for cleaning keyboards. or an air compressor. or if they dont have a lot of sickers put em in the dishwasher on the rinse only cycle. now that i read this ive noticed mine are pretty dirty, itll be an all day project cleanin them though.

Brad in WI · Dec 27, 2008

it will be the same for me. An all day job. I have 27 or so precisions and 30 highly detailed trucks and then another 20 or so high detailed tractors. I will try the air method nervous about the dishwasher.

Brad

Orangefever · Dec 28, 2008

the co2 only works so good. Ive always had to use windex and Qtips to get that like new shine back

how to clean my 1/16 models

Brad in WI

Member

rhettcale

Member

Brad in WI

Member

Orangefever

Member

Similar threads