Found a 620 for sale with no load no depth controll on the three point hitch? Set up for cultivators? Has rockshafts but no arms. Why was this built this way? Wher was this shipped
a275631.jpg

a275632.jpg

a275633.jpg
 
Lots of tractors without the 3 point arms out there. Hard to tell where the depth controls bracket could have gone in it's life time.
 
The three point parts sell for as much as the whole tractor would sometimes be worth.

I found a 530 for sale with the three point parts all missing. The seller said he got $1200 just for the missing parts. Hard to believe, but that was his story.
 
appears tractor heavily neglected....probably cannibalized[
quote="Tractornutjd"](quoted from post at 17:30:08 08/02/18) Found a 620 for sale with no load no depth controll on the three point hitch? Set up for cultivators? Has rockshafts but no arms. Why was this built this way? Wher was this shipped
a275631.jpg

a275632.jpg

a275633.jpg
[/quote]
 
Who ever ordered the tractor had no intentions of needing PTH. The machine's Duty
was to cultivate & why buy or order something that isn't needed.. Most dealers would
not have ordered a stock unit this way. I know of a late 620 without , tach, fuel gauge,
3 pth, power steering & rollamatic, But it does have a Float ride seat? I figure this
farmer had a bad back?
 
Many of them were speced out that way. Takes alot of parts to put set them up for the top link and load and depth parts. Should be planty of rear housings in junk yards you could swap the whole thing out or get the whole thing to get any parts you may need.
 
Yup, that was built as non tph tractor. There is a bunch of parts inside the run load/depth which are not there. Can not just add the arms and have tph. Look at parts book to see the differences.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top