John Deere 48 Loader - Front Mounting Bracket

jdfamily · Jul 26, 2018

This message is a reply to an archived post by tomstractorsandtoys on December 01, 2017 at 18:31:48.
The original subject was "Re: John Deere 48 Loader Front Mounting Bracket".

One more question on this post, I appreciate all the information, I am trying to mount a 48 loader on my 3010.
Does anyone have the measurements of the flat piece of metal that goes on the inside of the frame to support the
frame as you put the mounts on the frame, it is item 6 on the schematic. I am going to have to make those I
think.

tomstractorsandtoys · Jul 26, 2018

Unless you are going to use it for a bull dozer you do not have to have those. It is rare to ever see a set unless the tractor and loader were sold new together. If I were to want a set I would remove a frame rail from the tractor and take it to a welding shop with an iron worker. They could use the frame rail for a pattern and punch out nice square holes in what ever thickness metal you want. Tom

John Deere 48 Loader - Front Mounting Bracket

jdfamily

Member

tomstractorsandtoys

Well-known Member

Similar threads