Dan Nickels
Member
Baling with 620 and kicker baler, and getting
noise (cross between howl and dog barking)
seeming to come from clutch/pulley area. I am
thinking bearing in pulley. Owner manual says
remove clutch and pulley to grease. Parts manual
shows pulley on first, then bearing into it, then
clutch plates & disks etc. Question is, do I have
to remove pulley to get to bearing, or can
someone give guidance... Thank you... Dan
noise (cross between howl and dog barking)
seeming to come from clutch/pulley area. I am
thinking bearing in pulley. Owner manual says
remove clutch and pulley to grease. Parts manual
shows pulley on first, then bearing into it, then
clutch plates & disks etc. Question is, do I have
to remove pulley to get to bearing, or can
someone give guidance... Thank you... Dan