cultivator ID

hoipigeons · Jun 28, 2018

I need some help identifying a two row front mount cultivator I recently purchased. If anybody knows, I sure would appreciate finding out what I've got for sure, so I can get the correct manual. THANKS!!!

Tx Jim · Jun 28, 2018

Model 200

hoipigeons · Jun 28, 2018

Thanks so much!!!!!!!!!!!!!!!!!!!!!!!

Hotflashjr · Jun 28, 2018

I had a 200 for my MT. Did a nice job!

LSBull · Jun 28, 2018

We had a Model 200 like yours, with corn planter attachment, that we also used to side-dress corn!GREAT unit! Ran it on a 1950 B.
Be careful..it is a finger pincher also!LEN

Tx Jim · Jun 28, 2018

(quoted from post at 12:05:51 06/28/18) I had a 200 for my MT. Did a nice job!

IMHO if a model 200 frt mount rowcrop cultivator was installed on a JD MT then it was farmerized on the tractor.

Mike Aylward · Jun 28, 2018

I believe your cultivator is a 20 given it has springs and down pressure rods. The 200 series has chains in this area. Mike

Hay maker2 · Jun 28, 2018

Not Farmerized.

There was an MT-200 Cultivator. It used mostly the same parts as the ABG-200 except it had mounting brackets specific to the MT,

Look up PC127

Mike Aylward · Jul 4, 2018

I was mistaken about the chains. I have a 200 and it has the lift rods as well. I was thinking of the difference between a 40 and 400. The cultivator could be a 200 or a 20, either one. Mike

Tx Jim · Jul 5, 2018

(quoted from post at 16:40:46 06/28/18) Not Farmerized.

There was an MT-200 Cultivator. It used mostly the same parts as the ABG-200 except it had mounting brackets specific to the MT,

Look up PC127

Truss supports(keys 1 & 2) & side frames(keys 15 & 27) which aren't on a MT200 are the reasons I stated it's a model 200 not a MT200

cultivator ID

hoipigeons

Member

Tx Jim

Well-known Member

hoipigeons

Member

Hotflashjr

Well-known Member

LSBull

Member

Tx Jim

Well-known Member

Mike Aylward

Well-known Member

Hay maker2

Member

Mike Aylward

Well-known Member

Tx Jim

Well-known Member

Similar threads