rims for a 4010

2520-4010

Member
I was wondering if anyone knows of a site that will list any (all) rims that will fit my 4010??? Or
interchangeability of rims from one manufacturer to the next.

My in-laws have an old case 1370 with 20.8x38 tires that I suspect the rims and tires would fit on John
Deere tractors. The Case is probably going to scrap as they have no further use for it and there doesn't
seem to be much demand for that particular model. They also have a 670 MM with 34 inch rims that might also
it Deere tractors. Both tractors have almost new tires and I hate to see them go to waste.
 
I have a few 38 inch rims off JD 4240 +4440 they work fine on my Case 970 + 1070.

All Goodyear rims (I think).
 
A 4010 should have double bevel rear rims, probably either 15.5x38 or 18.4x34, so 14x38 or 16x34 rims. As long as you match the proper diameter just about ANY other brand of rear rims will fit a 4010. Rims were made to the Tire & Rim Manufacturer's Association specs, so an Electric Wheel rim (stamped Firestone) or French & Hecht rim ( stamped F&H) or a Motor Wheel rim (stamped Good Year) will look like, fit like, and work in place of any other brand of rim.

I bought rims, wheels, and tires for IHC Farmall for three years. I got my silver rims and red wheels FIRST, because most tractor mfg's used silver rims. The other colors came last, like yellow, white, orange, etc came last.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top