JD D oiler line

Patsdeere

Well-known Member
So the oiling tube in the valve cover got
busted. Seems this part and the cast elbow
it goes into are harder to find seems it
isn't uncommon for them to break. The elbow
is D31R. Thankfully the elbow isn't broken,
but did have the valve oiler tube broken
off in it. If I can't find it, I'll have to
drill the elbow out and retap. Any idea
what the tap size would be?

Thanks.
 
NEVER turn the OIL SUPPLY ELBOW with out a back-up wrench on the OIL SUPPLY line inside the Rocker Cover:

Always install the OIL supply Elbow before the Rocker assembly is attached to the head:

I've lost count of the number of twisted off oil supply tubes I have seen:


Bob....Retired Power Engineer....Gas Generator (Aero derivatives) back ground
a269122.jpg

a269123.jpg

a269124.jpg

a269125.jpg

a269126.jpg
 
Thanks again Bob,you are a lifesaver ! I am going through this right now on my radiator replacement and was wondering what to do, This is Exactly what i needed to see, Happy Happy Joy Joy....Tom
 
sunsettractor

Quote:

Thanks again Bob, you are a lifesaver ! I am going through this right now on my radiator replacement and was wondering what to do, This is Exactly what i needed to see, Happy Happy Joy Joy....Tom

Good evening sunsettractor....Glad to have been of assistance.

Knowledge weighs nothing,and should be passed on, as others have so kindly done when I had a concern:

Bob......
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top