1020 hydraulic hook-up locations

I am mounting a loader onto my 1020 utility and would like to find out which ports to tie in the high pressure and return hydraulic lines at the back end ?
 
The #37 loader on my 66 1020 plumbs into the belly. It doesn't have the SCVs for rear remotes. HTH.

82cG2j6.jpg
 
Thanks for the great picture . I?ve gone to the local JD dealer and they can?t seem to find the connector shown in your picture that has two
outlets. You wouldn?t have a reference no. In your records for it would you?
 

One thing to keep in mind is the photo is for an early model 1020(< SN 045199) that had open center steering & closed center hyd's for other hyd operations which these tractors had no pressure control(priority) valve. You local JD parts people can view the parts schematics for a JD 145 frt end loader to obtain correct part numbers for hyd fittings. Was your tractor built for sales in N America & if so is it's serial number above or below 045199??

mvphoto16719.png
 

I just checked JD parts & fitting(key 18) is NLA & has the following statement.

[/quote]he part C19281 is no longer available. Contact your local John Deere dealer for other options.[/quote]

I think one could find a 3/4'' ORB fitting in tee configuration at a good hyd supply business
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top