Can someone tell me what model number this is. Thanks
mvphoto16141.jpg
 
Looks like someone had a larger plow partially worn out and took the best two bottoms /frames and built their own 3 pt hitch for it.
 
(quoted from post at 22:27:05 05/08/18) Looks like someone had a larger plow partially worn out and took the best two bottoms /frames and built their own 3 pt hitch for it.

Or possibly converted a 5 bottom F145 to a 3 bottom semi-integral & then made a custom 3 pt 2 bottom plow.
 
Back in the 90's around here breaking land went out of favor and every sale had a couple of 4 or 5 bottom plows that went for junk price. Nobody wanted them. A local machine shop would buy the nicer ones and cut them down to 2-bottoms and sell in the garden market for $300-$350 each. Nice profit.
 

Very pretty Lipstick on this plow, but that 3-point hitch will NEVER take much abuse (2 light "U" Bolts?)..

Where the rear Landslide (or wheel)?

Obviously well-worn Shares and that suggests other wearing parts may need replaced..

To the untrained eye, it would surely sell though...!
 
The bottoms look homemade out of sheetmetal if you look at them the frogs are one piece with the moldboard . Someone probably fabbed them up when they couldn?t get blacksmith bottom parts the shares are not normal either
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top