banjoman09
Well-known Member
Had all this working fine- rebuilt Genny and set VR- was all working; pulled out of shed today to run around the farm and
noticed the "amp gauge" was in the middle - or "0"; Increased the throttle and nothing; put my light on the Genny while running
and the center and left post were hot on the rgulator; but at the battery my meter read 12.10 to 12.25 when running about 900
rpm...what the heck?
noticed the "amp gauge" was in the middle - or "0"; Increased the throttle and nothing; put my light on the Genny while running
and the center and left post were hot on the rgulator; but at the battery my meter read 12.10 to 12.25 when running about 900
rpm...what the heck?