Which Loader is it ???

Have a 50 with JD loader on it . This loader is nice ,real straight has no welds or bends and is complete with manure bucket ,dirt pan and snow bucket . Problem is model # and serial # are unreadable on the tag . I checked JD parts thinking it was a 45 , but a 45 has all the trip mechanism system on the RS . This loader has the trip handle, linkage to the bucket , bucket lock lever and bucket catch link for lever all on the LS . All of the above on this loader appear to be not switchable to the RS . So what model # is my loader????
 
Look on JD Parts catalogue for the JD 45 loader, PC-484 page 8. The trip handle for the two cylinders is on the left side. The trip handle for the 3010-4010 is on the right hand side.
 
The very remarkable #45 loader was, in fact, designed to fit and work with many farm tractors, above and beyond Deere Tractors. As with most vintage Deere farm machinery products, the design exceeded any other competition when used properly. I will stop now
 
A picture would have helped.
We had a 45 on a 520. It was made of pipes
bracketed together. Was always breaking up.
 
I think some 45's could be set up for either rt or lt. I think the "next" in the line was the 48 which had a single cylinder on the bucket and mounted forward on the frame instead of on the rear axles
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top