Fred from MO
Member
Fellow has one for sale with a 148 loader and around 200 hours for sale I was looking at but don't know much about this model or what to look for. Seems to be low hours but accurate??
- Thread starter Fred from MO
- Start date
buickanddeere
Well-known Member
Have a real close look at everything that could wear . Use a coolant test strip to measure the corrosion inhibitor in the coolant. How are the loader hydraulics plumbed into the tractor ? http://www.tractordata.com/farm-tractors/000/1/2/122-john-deere-2950.html
Tx Jim
Well-known Member
- Location
- Coyote Flats, Texas
I seriously doubt the tractor has only been used 200 hrs. Maybe speed/hr meter has rolled over and it's 10,200 hrs. Check clutch pedal,drawbar & 3 pt balls for wear.
200 hours will still have paint on the pedals and on the door near the latch release. Highly unlikely, and those have a 5 digit meter, so won't roll over til 99999 hours. Also, those electric meters have been known to stop working if not grounded properly. Otherwise a good tractor if well maintained.
Ben
Ben
radara4077
Member
Check out this thread for some more info (and opinions) on the 2950:
http://forums.yesterdaystractors.com/viewtopic.php?t=1337908&highlight=
In my opinion, as long as you don't have issues going in to it, and it's been well taken care of, you'll be getting yourself a fine machine.
http://forums.yesterdaystractors.com/viewtopic.php?t=1337908&highlight=
In my opinion, as long as you don't have issues going in to it, and it's been well taken care of, you'll be getting yourself a fine machine.
Similar threads
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.
Copyright © 1997-2024 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy