3020 engine

Have you checked All States Ag Parts they have reman long blocks ready to go and they also probably have some used engines
 
%%%
a255326.jpg
 
I?ve always wondered about the quality of those reman engines ? I know buy the time I had the crank polished new camshaft and the head rebuilt with new valves guides springs and everything else and new oil pump plow the engine kit and all new bolts I wasn?t much cheaper than 9000$ on my 4020 engine overhaul
 
I got this from a friend, that bought it for the loader,roll guard and dual Hydraulics..It had been setting a while, I put a rebuilt injector pump on it,,flushed and cleaned the oil pan through the filter port it started quickly and has 25lbs of oil pressure at idle,,sounds good for setting a bit (couple years)the clutch was stuck,, I just split it and freed the clutch up so I can check the transmission,,If I liked 3020's I would re-store it, tires and rims are rough some sheet metal is gone,,it's not pretty, but seems to be basically solid serial #121210... I have too many other projects going on right now..so I am going to move it on,, whole or parts....
 
Okay the transmission feels good too,,If I was younger I would be looking at making a light weight "Wanna Be" 4020 to pull in the 75-9000 lb class...but all those Therapy sessions have cured me...
 
Is it a early or late model(69-72)? I have a rebuilt cylinder head from a 69 model I'd sell. Have a block too but it needs inserts in the bottom of the 2 cylinders because of cavitation
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top