Pressure plate 1010

I?m replacing the clutch in a 1963 1010ru. When I got her opened up the psi plate looks brand new. Is there anyway to test the poundage to see if it is still good??? Thanks
 
Lay a straight edge across the machine surface and see if a .006 feeler gauge will slide under it anywhere. They warp in the center and you loose drive surface.
 
If it hasn't been hot enough to warp the pressure plate you should be all right.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top