John Deere H

D-

Well-known Member
What is the main bearing clearance for an H.
I'm thinking around .004 but don't remember for sure.
Thanks
 
This is data taken from one of the old Field Service Bulletins:

Main Bearing I.D. (In.): 2.065 - .001
Crank and Main Bearing (In.): 2.062 - .001

So it looks like a nominal .003, but could be as loose as .004, or as tight as .002.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top