I need to replace the deteriorated rubber washers (A4666R) on the hood bolts for my 70D. Deere still lists them as available, but on general principle I really don't want to pay $4.49 each. There's at least seven required, too.
The aftermarket doesn't seem to have this particular size. Has anyone identified a substitute from plumbing or automotive use? They're 1" OD, 0.594" ID (basically 9/16"), and 1/4" thick.
Meanwhile, looking through McMaster's site I found: https://www.mcmaster.com/#3733k16
These are neoprene, 1-1/8" OD, 5/8" ID (0.625") and the correct thickness. $10.38 plus postage for a lifetime supply of two dozen. Just a hair large but I think they'd work since they don't actually seal anything, just provide a cushion.
Any other thoughts?
thanks
Charles
The aftermarket doesn't seem to have this particular size. Has anyone identified a substitute from plumbing or automotive use? They're 1" OD, 0.594" ID (basically 9/16"), and 1/4" thick.
Meanwhile, looking through McMaster's site I found: https://www.mcmaster.com/#3733k16
These are neoprene, 1-1/8" OD, 5/8" ID (0.625") and the correct thickness. $10.38 plus postage for a lifetime supply of two dozen. Just a hair large but I think they'd work since they don't actually seal anything, just provide a cushion.
Any other thoughts?
thanks
Charles