630 all-fuel

Dave Gunem · Sep 30, 2017

This message is a reply to an archived post by Charllie in MO on June 15, 2012 at 10:29:17.
The original subject was "Re: 630 allfuel".

Old thread but here"s mine . Shipped to Atlanta 11/13/58 final destination Waynesboro GA . 6303068 no powersteering , tach , gas gauge or air stack . Does have a 3 point .

<image src="http://forums.yesterdaystractors.com/photos/mvphoto4141.jpg"/>

<image src="http://forums.yesterdaystractors.com/photos/mvphoto4142.jpg"/>

coonie minnie · Oct 1, 2017

Nice looking tractor. In my neighborhood it is very rare to see the power adjust wheels... or all fuel, of course!

Find it interesting it has the power adjust wheels, but no PS, tach, etc.

Jon Erickson · Oct 1, 2017

You are lucky to have that 630. It sure is an interesting specimen.

Dave Gunem · Oct 1, 2017

Sorry for the confusion - it had standard F1500R cast centers with 12" rims .

I put the spinners on it .

My 620 all-fuel has PS and a tach . No fuel gauge .

Both do not have float ride seats .

The thread I posted this too had a 630 AF just like mine .

8e3k0 · Oct 27, 2017

Interesting, I have serial # 6316591 that was one of three shipped to Atlanta GA in 1960-01-20. Final destination was Moultrie, GA. It came with power steering, all gages including tach and full three point. Front was roll o matic but no fenders. Tractor was later converted to gas. A very nice runnig tractor. I have the correct manifold for it.

fixerupper · Oct 27, 2017

Interesting picture. In my neck of the woods I don’t see many two bangers with fenders and none of them have spin out wheels, though I know they were available and you said you added them to this tractor.
As I understand all fuel 630’s are rare?

630 all-fuel

Dave Gunem

Member

coonie minnie

Well-known Member

Jon Erickson

Member

Dave Gunem

Member

8e3k0

Member

fixerupper

Well-known Member

Similar threads