Does someone know the thickness of a styled G head? (F551R)
Also, what is the distance from the center of the wrist pin to the top of an M&W high compression piston? (.125" over)
Piston: http://www.external_link.com/mm5/merchant.mvc?Screen=PROD&Store_Code=oldjd4u&Product_Code=G791&Category_Code=73
My dad had the head decked around 20 years ago and can't remember by how much. I just measured the head and it is 5.56" from the valve cover surface to the block surface. I want to have the block bored and put these pistons in this winter and I'm trying to see if I'll have valve clearance issues before I get too carried away.
Any help is appreciated.
It also seems that the bodies of my other posts weren't showing up because I previewed my post before submitting
Also, what is the distance from the center of the wrist pin to the top of an M&W high compression piston? (.125" over)
Piston: http://www.external_link.com/mm5/merchant.mvc?Screen=PROD&Store_Code=oldjd4u&Product_Code=G791&Category_Code=73
My dad had the head decked around 20 years ago and can't remember by how much. I just measured the head and it is 5.56" from the valve cover surface to the block surface. I want to have the block bored and put these pistons in this winter and I'm trying to see if I'll have valve clearance issues before I get too carried away.
Any help is appreciated.
It also seems that the bodies of my other posts weren't showing up because I previewed my post before submitting