I just brought home a 620 that has a little issue with the idle shaft between the governor and the hydraulic pump. I have not been able to get the oil lines out of the
hydraulic pump. Actually I got the smaller one out with pb blaster, but have not been able to get the other out. I am afraid of damaging the line, and was hoping if
someone out there has a suggestion on getting the oil line out. I tried a little heat, but I was afraid of damaging something else so I quit.
The idle shaft is held in place with a pin that has apparently broken and allowed the shaft to spin and wallow the hole out on the governor housing. Anybody know where a
I might be able to find a new governor housing, or a whole governor unit.I live in Utah and have checked some salvage yards but no luck yet out here in the west. Thanks
for your help.
hydraulic pump. Actually I got the smaller one out with pb blaster, but have not been able to get the other out. I am afraid of damaging the line, and was hoping if
someone out there has a suggestion on getting the oil line out. I tried a little heat, but I was afraid of damaging something else so I quit.
The idle shaft is held in place with a pin that has apparently broken and allowed the shaft to spin and wallow the hole out on the governor housing. Anybody know where a
I might be able to find a new governor housing, or a whole governor unit.I live in Utah and have checked some salvage yards but no luck yet out here in the west. Thanks
for your help.