(800) 853-2651
SHOP NOW

John Deere?

T

Todd Widener

New User
3460.jpg


2 Questions:
What is this equipment? Is it a John Deere? Is it a Dain Manufacturing Company Equipment - Hay Chopper, Windrow Pick Up Press, Ect? Trying to find out what it is and Model/Year. I have the John Deere Engine on it, just need to find out what the equipment it sits on is? Photo off of internet but no info of it. Can only fine 2 photos on the internet total.

My engine I am told by Two Cylinder is a John Deere Model "LUE" made in 1944 and the Destination was the Dain Manufacturing Co. (John Deere-Dain Hay Works). They did not tell me what kind of equipment it went to. My Serial # Tag on the engine tells me it is a John Deere "LU" Power Unit. So I don't know if a "LU" or a "LUE" is the same or different?

Any info would be great! I am at a loss.
 
Look for other castings on the machine for a part number and repost.

Part numbers starting with "E" is the John Deere (originally Dain) factory part number designation here at Ottumwa, Iowa.

The machine in the photo is a baler, but probably called a pickup hay press of that era. Have not seen a photo of one
before. Are there other pictures of the machine?
 
I have an LUE just like that . I think the E in LUE meant it was sent or made for Dain. Also only like 1300 went to Dain and as far as I know the rear gearbox on the LUE was not used in the other LU engine series.
 
(quoted from post at 16:57:41 09/17/17) I have an LUE just like that . I think the E in LUE meant it was sent or made for Dain. Also only like 1300 went to Dain and as far as I know the rear gearbox on the LUE was not used in the other LU engine series.
Click to expand...

Thank You for the info.
 
None that I am aware of (photos).

My engine is covered with a bad repaint job of many years ago. Can not find any other info on it until a restore to get rid of the paint.

Thank You
 
I think you are right - close but not the same.

It seems to be no one can tell me the model or name of the machine the engine is sitting on in the photo. My engine is from 1944 per the 2 cylinder club, so this machine has to be 1944 or later. The front wheel and some small other items are what's different, but close.

Thank You
 
You must log in or register to reply here.

Similar threads

6
John Deere 830
Replies
5
Views
556
rec4520
R
H
John Deere model R manure spreader
Replies
1
Views
334
Jim.ME
J
mikewood869
1944 John deere A pedestal
Replies
3
Views
389
RLA
R
D
John deere unstyled ar with red paint
Replies
3
Views
401
Pete in MD
Pete in MD
B
John Deere M Front Wheel Removal
Replies
5
Views
276
M-MAN
M-MAN
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top