centerhice
Member
I"m attempting to mount a loader onto my 1020U and would appreciate advice on where to plumb the hydraulic high pressure and return lines .
Thanks.
Thanks.
- Thread starter centerhice
- Start date
buickanddeere
Well-known Member
Loader requires a closed center joystick valve.
Tx Jim
Well-known Member
- Location
- Coyote Flats, Texas
Loader valve pressure should be attached on RH side behind pressure control valve & return hose attached to hyd ported filter cover similar to photo.
Briar Hill Brittanys
Well-known Member
- Location
- Near Jasper, MO
The 37 loader on my 1020 plumbs to the belly. IIRC, the return goes to the filter housing, and the pressure side just aft of there. If need be, I could get you a picture. HTH. Mark
centerhice
Member
Thx guys
Similar threads
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.
Copyright © 1997-2024 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy