John Deere 50 hyd lift problem

longmeadowfarm · Aug 17, 2017

The 3-point lift arms on my 50 quit working. Pump seems to engage/diengage with the knob..but the lift arms will not raise. Relief valve, perhaps?
thanks

Pete in MD · Aug 17, 2017

Have you been engaging the pump with the engine running or off?

Hay maker2 · Aug 17, 2017

(quoted from post at 12:18:55 08/17/17) The 3-point lift arms on my 50 quit working. Pump seems to engage/diengage with the knob..but the lift arms will not raise. Relief valve, perhaps?
thanks

Are the dummy plugs in the remotes?

James Howell · Aug 17, 2017

"[b:654c4848f0][i:654c4848f0]<font color="#6699ff">the lift arms will not raise.[/i:654c4848f0][/b:654c4848f0]</font>"

Reviewed the [b:654c4848f0]Hydraulic Equipment SERVICE MANUAL SM-2011[/b:654c4848f0] under the [b:654c4848f0]Section 70 TROUBLE SHOOTING Group 5 POWR-TROL[/b:654c4848f0] in the [b:654c4848f0]WILL NOT RAISE[/b:654c4848f0] table on page 70-5-1.

Take a look at the [b:654c4848f0]WILL NOT RAISE[/b:654c4848f0] table below.

Hope this helps.

Kent Petersen · Aug 19, 2017

Check the oil level frist

John Deere 50 hyd lift problem

longmeadowfarm

Member

Pete in MD

Well-known Member

Hay maker2

Member

James Howell

Well-known Member

Kent Petersen

Well-known Member

Similar threads