Turn pins & Bushings JD40C

CPeter

Member
I am in New Hampshire and wondered if anyone know of someone who could turn the pins and busings on my 4 roll 40C. They are good enough to turn and I would like to try and get it done. I am willing to travel say up to 150 miles or so. These are the smaller ones, not the ones on the 420,430, etc. I understand it takes "special" brackets to do it. Do the pads need to be removed? Would I save a bunch of money by removing the pads myself?
CPeter
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top