4020 Lift Link Disassembly

JCMN

New User
Is there anyway to remove the knuckle at the top of the 3-pt lift link, short of just cutting it out? I have a new clevis and threaded rod I want to install, and would like to reuse as many parts as possible.
<image src="http://forums.yesterdaystractors.com/photos/mvphoto1328.jpg"/>
 

Welcome to YT
I've never seen dowels removed from yoke but I agree cutting the dowels appears to be the only way to disassemble the parts.If the knuckle in the center is damaged be aware that it is NLA from JD.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top