3010 gas industrial

JCtractorboy

New User
Hello guys, I am new to the forum but have been browsing for a while.

My pto lever will wiggle and the shaft that goes down into the housing wiggles too, but it feels like its stuck, any ideas how to free it? I do not want to split the tractor.

Would like to know the history of this tractor too, the serial is 15t33234

Thanks!
JC
 
Type John Deere and your serial number into google.
It will bring up the following information from an Ohio auction from October 2011.

JD 3010 Gas Industrial Tractor w/ Loader

o 1 of 192

o 1963

o Runs ok, rubber 40% (not restored or shown)

o Serial #15T 33234

As far as the lever goes if the shaft is not seized in the bushing from not being used I can't be of much help to you.
 
That was a cool trick to see the past
history on the 3010, I got it without the
loader as previous owner took it off and
sold it, wish it came with it!


The shaft I mentioned, I meant to say the
linkage that goes into the housing wiggles,
but I am going to pull the plate cover
between the dash and seat and go from
there.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top