2010 Pistons in a 1010 block

Mnethercutt · Jun 23, 2017

Will 2010 gas pistons (T12382) standard size fit in a 1010RU engine and crank? Found some brand new for a really good price and thought it would be good to have some spares in case one of mine goes out.

JDEM · Jun 23, 2017

Are you talking about 2010 gas pistons for a 1010 diesel I hope? If so, same born. I don't know if they are both flat-top and
have the same dimensions like pin bore and standout. If for a 1010 gas, not a chance.

Mnethercutt · Jun 23, 2017

No, unfortunantly I was going gas (I think, they might be diesel, the seller on eBay doesn't specify) to gas.

If anyone's interested here's the link. 3 brand new pistons, right now 40 dollars at auction.

http://www.ebay.com/itm/John-Deere-piston-T12382-/162559406960?hash=item25d94bb370:g:2AIAAOSwjKFZOeNg

JDEM · Jun 24, 2017

A 2010 gas and a 1010 diesel are both 144 cubic inches and use the same sleeves. A 1010 gas is much smaller at 115 cubic
inches. Near the same size as a two-clyinder in a 420 that is 113 cubic inches.

2010 Pistons in a 1010 block

Mnethercutt

Member

JDEM

Well-known Member

Mnethercutt

Member

JDEM

Well-known Member

Similar threads