4020 propane priming

D&amp;C Farm · Jun 7, 2017

Had to replace head gasket and tank valves put back together turns over but won't start how do I purge the air out of system to start it

rick deere · Jun 8, 2017

As far as I ever new you don't worry about that don't think you have to worry about it, You really should get a book and read about lp before you get hurt.

DONMYEIL · Jun 8, 2017

There is a manual button on the side of the converter ,just push it a couple times, and with the throttle closed crank the engine . Cold start with vapor, after engine is warmed then you can go to liquid . Spark plug gap .015 , points set the same. If you flood it turn off tank valves and crank the engine . I assume you have LP and the electric shut-off is working .

4020 propane priming

D&C Farm

Member

rick deere

Well-known Member

DONMYEIL

Member

Similar threads

4020 propane priming

D&amp;C Farm

Member

rick deere

Well-known Member

DONMYEIL

Member

Similar threads

D&C Farm