Piston rings 630

craigco

Member
How do you clock the gaps on the piston rings? Stager at say 12 then 6 alternating them, or more positions like 12, 6, 3,9?
 
Just stagger them making sure no gaps are close from top to bottom. They will move anyway as the engine runs in. I move the one below the top 180" and move the 3rd 90" and do the same. Hone the cylinders well!
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top