5103 fuse panel help

Mattr2589 · May 26, 2017

I know this isn't a very old tractor but I'm looking for some help. I have a 2003 JD 5103. Apparently I had some corrosion in the fuse terminals that has created a lot of heat and melted 2 slots in the fuse panel. I've been to 2 dealers looking for parts to fix it but haven't had any luck. I need the terminals and the buss bar that goes in the back of the panel. The buss bar is a bar that runs down the middle of the fuse panel that supplies power to 4 different fuses. I can't seem to find any part numbers or pictures of any of this. The only thing I have gotten is the plastic housing so far. Any help would be greatly appreciated.

Tech 7 · May 26, 2017

I have run into this before and instead of putting in a new panel I "patch" in an inline fuse/holder.Pretty? No. but it will outlast what was there before.

Mattr2589 · May 26, 2017

Thanks buddy. That's what I'm going to do for now since it's hay season and hope I can find the correct parts soon. I hate to cut and rig on a tractor this new and it seems silly to me that I can't get parts for a 14 year old tractor.

4020 electrician · May 27, 2017

We did what Tech7 suggested on a 5403. Not sure how many hrs you have on it, but we were doing hay and they have a junk clutch. Ours was toast at 1100 hrs.

5103 fuse panel help

Mattr2589

New User

Tech 7

Well-known Member

Mattr2589

New User

4020 electrician

Member

Similar threads