Mnethercutt
Member
Ok, so I'm stumped w/ this. my 1010 isn't charging the battery. I've followed John T's charging guide, couldn't identify the problem, so i'm going to list off everything I know here and see if someone can tell me what my problem is.
-I have had the genny removed and tested. It works like it should.
-I have installed a NEW VR purchased from this site.
-I have a new John Deere strongbox battery.
-I have polarized and checked the groun don the new VR.
-I have re-wired the whole tractor.
-I have a wire running from the gens A post to the A post on the VR.
-I have a wire running from the gens F post to the F post on the genny.
-I have a wire running from the VR's BAT terminal to the starter. It is touching the battery cable.
-I have checked the continuity on all wires. No problems.
Anybody have any clue what i'm missing? I know there's a 4th point on the VR that I didn't mention here but I can't remember where its going off the top o fmy head, I think the key switch?
-I have had the genny removed and tested. It works like it should.
-I have installed a NEW VR purchased from this site.
-I have a new John Deere strongbox battery.
-I have polarized and checked the groun don the new VR.
-I have re-wired the whole tractor.
-I have a wire running from the gens A post to the A post on the VR.
-I have a wire running from the gens F post to the F post on the genny.
-I have a wire running from the VR's BAT terminal to the starter. It is touching the battery cable.
-I have checked the continuity on all wires. No problems.
Anybody have any clue what i'm missing? I know there's a 4th point on the VR that I didn't mention here but I can't remember where its going off the top o fmy head, I think the key switch?