sam un ont
Member
Another really dumb question. When I removed the pumps I merely unbolted, and loosened injector lines and pulled the snap ring between the pumps and the injector control rod to the governor. Unfortunately I paid no attention to the hookup between the pump and the governor.
I suspect that I had dropped something The manual is not clear as to this hookup although I suspect that there must be some type of half sleeve.
Does anyone have a picture or an explanation of this hookup and if they are somewhere down in the engine is it possible to get a replacement
Other than this she is ready to fire
Sam
I suspect that I had dropped something The manual is not clear as to this hookup although I suspect that there must be some type of half sleeve.
Does anyone have a picture or an explanation of this hookup and if they are somewhere down in the engine is it possible to get a replacement
Other than this she is ready to fire
Sam