4250 Widened Out

2510Paul

Well-known Member
We got the 4250 Widened out to fit 4200 Rollover Plow, 3x18", rear and front. My son says I need to check the toe-in and then I will prepare and paint the tie rods. We also put a new seal cap on one of the 3pt lift arms, changed transmission/hydraulic oil and filters/pre-screen, and added a spring to hold the 3pt arms together. I have a new step kit on back order coming for it. Engine air and cab filters also need to be changed yet.

The last picture is my daughter chain sawing. She loves to run the saw but I keep a close eye on her. The tree she is working on I had my older son finish off. We had a Farmi winch hooked to it quite high to make sure it did not go towards the buildings.

Paul
a154640.jpg

a154641.jpg

a154642.jpg
 
After the first couple hours running check your wheels and see that they are tight yet. Just for safety sake. chris
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top