Power trol capacity

Mark Poss · Jan 17, 2017

How much hydraulic oil does the power trol hold on a John Deere G? Thanks for your help, Mark

susandiane · Jan 17, 2017

I think they are all about the same. The owners manual for my 70 says "approximately 6 US quarts". My I & T manuals don't give a capacity, but cover all the letter series of tractors that had them in the same section, so I think the about 6 qt is going to get you to the neighborhood of where it will run out of the level checking petcock.

Mark Poss · Jan 17, 2017

Thanks

Dan in Ohio · Jan 17, 2017

Mark,

Check this out.
Two cylinder tractor capacities

ben70b · Jan 17, 2017

That's a cool little chart

coonie minnie · Jan 17, 2017

The 6 quarts listed below sounds about right. I usually overfill mine, as we have some dump wagons we dump with the power trol, and those big one way cylinders need the extra oil. Some loaders even had an extra tank founted to the filler hole, so that the units had enough oil reserve to lift the loader.

Dan in Ohio · Jan 18, 2017

Would have expected John Deere to complete the chart, at least add the power steering capacity for the two numbered series.

Ferd · Jan 18, 2017

My G owner's manual says (page 29) "Oil capacity is approximately 5 U.S. quarts for the power lift and Powr-Trol, and 1 U.S. quart for the remote cylinder".

Power trol capacity

Mark Poss

Well-known Member

susandiane

Member

Mark Poss

Well-known Member

Dan in Ohio

Well-known Member

ben70b

Member

coonie minnie

Well-known Member

Dan in Ohio

Well-known Member

Ferd

Member

Similar threads