John Deere M What are the selling for ??

FarmallRay · Jan 16, 2017

Looking at a John Deere M Runs , Tins fairly straight, looks like a poor older repaint. Thinking about it for a project. What are they selling for now days?? Thanks

JD Seller · Jan 16, 2017

What style??? Tricycle, wide front, etc. It makes a difference in what they are worth. Also location does as well. In general a none restored but running JD "M" will bring in the $1500-2500 range with wide front end ones bringing the most.

muleboss · Jan 16, 2017

If it was narrow front would probably be a MT.

Hay maker2 · Jan 16, 2017

(quoted from post at 00:59:27 01/17/17) What style??? Tricycle, wide front, etc. It makes a difference in what they are worth. Also location does as well. In general a none restored but running JD "M" will bring in the $1500-2500 range with wide front end ones bringing the most.

M = Standard
MT = row crop version, either a tricycle, wide front or narrow front
MI = Industrial
MC = Crawler

FarmallRay · Jan 16, 2017

Its the standard nonadjustable wide front end

rick deere · Jan 16, 2017

1000'

Russ from MN · Jan 16, 2017

There were a few MTW's but I think they're rare. (Row crop wide front) I just went to tractordata and they don't list it, but I have a JD
collectors guide at home and that's where I saw it.

M-MAN · Jan 16, 2017

$1200 to $2000 just like they have for the last 20 years.

Mike M · Jan 17, 2017

And then toss another $1200 to $ 2000 plus to get it all straightened out. And you still have a tractor worth $ 2000. Such is the story of my life.

James Howell · Jan 17, 2017

Folks are really "proud" of them here in Texas and prices range from $1500 to $3500 depending on condition.

Paid $2000 for "Sparky" back in 2008.

Tractor ran good, had straight tin, and was painted with a brush.

Should make <a href="https://youtu.be/qDVlWlAVfik">a good project</a>.

Hope this helps.

Mike M · Jan 17, 2017

A VERY nice grille indeed !

Many of them from up here in Ohio have cracked and or welded up heads and blocks from freezing.

James Howell · Jan 17, 2017

"<font color="#6699ff">[b:654c4848f0][i:654c4848f0]A VERY nice grille indeed ![/b:654c4848f0][/i:654c4848f0]</font>"

We have also been very fortunate with the condition of the grilles on our three 1951 MTs.

"Mac" had a grille with a MC decal on it.

"Rusty" is just as the name implies.

"Sam" is the original paint.

We really like and enjoy our M and MTs.

RLA · Jan 17, 2017

Since it's s standard Model with none adjust frt end I wouldn't
go much over 11 or 1200. unless it had all new rubber. And it would
be straight & not all rusted away..

John Deere M What are the selling for ??

FarmallRay

Member

JD Seller

Well-known Member

muleboss

Member

Hay maker2

Member

FarmallRay

Member

rick deere

Well-known Member

Russ from MN

Well-known Member

M-MAN

Well-known Member

Mike M

Well-known Member

James Howell

Well-known Member

Mike M

Well-known Member

James Howell

Well-known Member

RLA

Well-known Member

Similar threads