tractorguy2

Well-known Member
Working on a 630 that quit running suddenly. The problem is the wiring harness got caught of the steering joint. It ripped the wires off the amp meter and pulled all the plugs off the ignition switch.

I have the amp meter fixed. And power to the ignition switch and to the distributor. There are four light plugs I don't know where they go.

Can anyone tell me what color wires go where on the ignition switch?
 
If you will connect to JohnnyPopper.kom, you can see wiring diagrams for most 2 cyl tractors.
 
This is ONLY a start, check out the other diagrams at johnnypopper.com

John T
530-630-730-GAF-JPEG.jpg
 
"<font color="#6699ff">[b:654c4848f0][i:654c4848f0]Can anyone tell me what color wires go where on the ignition switch?[/i:654c4848f0][/b:654c4848f0]</font>"

Does your tractor have [b:654c4848f0]TWO[/b:654c4848f0] headlamps or [b:654c4848f0]FOUR[/b:654c4848f0] headlamps?
 
Take a look at the diagram below.

a247295.jpg" width="650"


Note the color coding for the various wiring harnesses.

Take a look at the photos below of the four light terminals on the ignition switch.

a247300.jpg" width="650"


a247299.jpg" width="650"


a247301.jpg" width="650"


a247302.jpg" width="650"


Hope this helps.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top