Re: 4020 Steering problem

tim s · Nov 29, 2016

Yes, a little,, I've been kinda busy here in the shop last few weeks,,but I'm still reading the post...

tim s · Nov 30, 2016

The steer valve is ornery to get out, but take your time and you won't have any trouble..put it in a bucket and ship it to me if you want,, they weigh 74 lbs., the kit is $130, I charge $250 for repair and bench test, so $380 plus shipping is the cost,, the Bench test is an important part of the process,, no one wants to "Guess" if it's okay and go through all the trouble of pulling it more than once. As for the steer motor, I still do then in the frame, like an old guy told me once "anything you don't need to take off,,you don't need to put back on"..When you get ready to do the steer motor I can walk you through it, there are Timing marks on them to help you make sure it's going together correctly. Here are a few pics to give you an Idea of where your headed..

Re: 4020 Steering problem

tim s

Well-known Member

tim s

Well-known Member

Similar threads