John Deere 4050

I started using them about two years ago. They are much easier to install and you can take the sections out and reuse them if you need too. I would NOT go back to the original style cab kits. You can do a much neater job the first time out. You paying about $70 more for the quick kits for just the lower half. You will save about 2-3 hours of time to install it. You will also be more likely to get a better looking job if you have never done one before.
 
Sounds like what I need for my 4250. The 50 series cab interiors did not hold up as well as the 40s. Let us know where you get them.
 

Fehr cab interiors 'easy install kit'....all the major lower foam parts are on a flexible plastic backing...glue in with a 'liquid nails' type adhesive
 
I am in no way affiliated with Fehr Cab but have used their products many times (including the quick fit kit for a 4050) with excellent results. There are other aftermarket kits out there but they don't compare to Fehr.
You can search their website or e-mail me and I can send the phone # Have your tractor and cab serial numbers in hand for some orders.
 
I have used Fehr Upolstery just south of me they been selling kits for 30 years and they have best fitting kits I have used
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top